Effects of carbon fiber reinforced polymer wrapping strength on behavior of steel hollow short column under concentric axial force
DOI:
https://doi.org/10.29194/NJES.29010075Keywords:
Steel Hollow Short Columns (SHSC), Carbon Fiber Reinforced Polymer (CFRP), Local Buckling, CFRP RuptureAbstract
In this study, behavior of steel hollow short columns fabricated from steel square section under axial load is investigated with and without CFRP strengthening, five specimens of SHSC without strengthening are tested by applying concentric axial force; and the obtained results are compared with fifteen SHSC strengthened with CFRP wrapping with different five percentage from the total length of the specimens as follows (20%, 40%, 60%, 80%, and 100%) and each strengthening length consist from three different layers (one, two and three) layers. The curves of load-displacement are plotted for the specimens with maximum strength load. The results show that the most effective type of CFRP wrap strengthening is the full length of the specimens and especially with two and three layers. The increase in the load carrying capacity is 34.5% from 126.37 kN for SHSC-C to 170.02 kN for SHSC-100-3L, and the increase for ductility index is 23.6 % from 1.39 for SHSC-C to 1.72 for SHSC-100-2L. The pattern of failure for the specimens; non strengthened or strengthened with less than full length is local buckling, while the failure is CFRP rupture with local buckling for specimens strengthened with full length specimen.
Downloads
References
J. C. McCormac and S. F. Csernak, Structural Steel Design. India: Pearson, 2013.
M. Imran, M. Mahendran, and P. Keerthan, "Experimental and numerical investigations of CFRP strengthened short SHS steel columns," Eng. Struct., vol. 175, pp. 879-894, 2018.
https://doi.org/10.1016/j.engstruct.2018.08.042 DOI: https://doi.org/10.1016/j.engstruct.2018.08.042
M. R. Ghaemdoust, K. Narmashiri, and O. Yousefi, "Structural behavior of deficient steel SHS short columns strengthened using CFRP," Constr. Build. Mater., vol. 126, pp. 1002-1011, 2016.
https://doi.org/10.1016/j.conbuildmat.2016.09.099 DOI: https://doi.org/10.1016/j.conbuildmat.2016.09.099
J. Park and J. Yoo, "Flexural and compression behavior for steel structures strengthened with carbon fiber reinforced polymers (CFRPs) sheet," Steel Compos. Struct., vol. 19, no. 2, pp. 441-465, 2015.
https://doi.org/10.12989/scs.2015.19.2.441 DOI: https://doi.org/10.12989/scs.2015.19.2.441
A. B. B. Abu-Sena, M. Said, M. A. Zaki, and M. Dokmak, "Behavior of hollow steel sections strengthened with CFRP," Constr. Build. Mater., vol. 205, pp. 306-320, 2019.
https://doi.org/10.1016/j.conbuildmat.2019.01.237 DOI: https://doi.org/10.1016/j.conbuildmat.2019.01.237
J. Wang, J. Di, Q. Zhang, F. Qin, and P. Men, "Local buckling analysis of axially compressed welded box-section stub columns using Q429-Q960 steel," J. Constr. Steel Res., vol. 210, pp. 1-13, 2023.
https://doi.org/10.1016/j.jcsr.2023.108100 DOI: https://doi.org/10.1016/j.jcsr.2023.108100
I. R. M. Mohamed and S. S. Safar, "Experimental and numerical investigation on torsion strength of high gauge SHS strengthened with CFRP wraps," Struct., vol. 34, pp. 2818-2839, 2021.
https://doi.org/10.1016/j.istruc.2021.08.109 DOI: https://doi.org/10.1016/j.istruc.2021.08.109
O. Yousefi, K. Narmashiri, A. A. Hedayat, and A. Karbakhsh, "Strengthening of corroded steel columns under axial compressive loads using CFRP," J. Constr. Steel Res., vol. 178, pp. 1-11, 2021.
https://doi.org/10.1016/j.jcsr.2020.106496 DOI: https://doi.org/10.1016/j.jcsr.2020.106496
T. Tafsirojjaman, A. U. R. Dogar, Y. Liu, A. Manalo, and D. P. Thambiratnam, "Performance and design of steel structures reinforced with FRP composites: A state-of-the-art review," Eng. Fail. Anal., vol. 138, pp. 1-25, 2022.
https://doi.org/10.1016/j.engfailanal.2022.106371 DOI: https://doi.org/10.1016/j.engfailanal.2022.106371
M. Karimian, K. Narmashiri, M. Shahraki, and O. Yousefi, "Structural behavior of deficient steel CHS short columns strengthened," J. Constr. Steel Res., vol. 138, pp. 555-564, 2017.
https://doi.org/10.1016/j.jcsr.2017.07.021 DOI: https://doi.org/10.1016/j.jcsr.2017.07.021
K. Karimi, W. W. El-Dakhakhni, and M. J. Talit, "Behavior of slender steel-concrete composite columns wrapped with FRP jackets," J. Perform. Constr. Facil., vol. 26, no. 5, pp. 590-599, 2012.
https://doi.org/10.1061/(ASCE)CF.1943-5509.0000280 DOI: https://doi.org/10.1061/(ASCE)CF.1943-5509.0000280
K. He and Y. Chen, "Experimental investigation of fire-exposed steel tubular stub columns wrapped with CFRP sheets," Compos. Struct., vol. 253, pp. 1-16, 2020.
https://doi.org/10.1016/j.compstruct.2020.112807 DOI: https://doi.org/10.1016/j.compstruct.2020.112807
L. Gao, H. Sun, F. Jin, and H. Fan, "Load-carrying capacity of high-strength box-sections I: Stub columns," J. Constr. Steel Res., vol. 65, pp. 918-924, 2009.
https://doi.org/10.1016/j.jcsr.2008.07.002 DOI: https://doi.org/10.1016/j.jcsr.2008.07.002
P. Feng and L. Hi, "Steel columns strengthened/reinforced by prestressed CFRP strips: Concepts and behaviors under axial compressive loads," Compos. Struct., vol. 217, pp. 150-174, 2019.
https://doi.org/10.1016/j.compstruct.2019.03.038 DOI: https://doi.org/10.1016/j.compstruct.2019.03.038
G. M. Al-Mekhlafi, M. A. Al-Osta, and A. M. Sharif, "Experimental and numerical investigations of stainless steel tubular columns strengthened by CFRP composites," Thin-Walled Struct., vol. 157, pp. 1-14, 2020.
https://doi.org/10.1016/j.tws.2020.107080 DOI: https://doi.org/10.1016/j.tws.2020.107080
C. Liu, J. Xiao, K. Ma, Z. Liu, H. Zhang, and Y. Qiu, "Experimental and numerical investigation on short CHS steel columns restrained with HFRP under axial compressive loading," Constr. Build. Mater., vol. 438, pp. 1-19, 2024.
https://doi.org/10.1016/j.conbuildmat.2024.136715 DOI: https://doi.org/10.1016/j.conbuildmat.2024.136715
A. Shaat and A. Z. Fam, "Slender steel columns strengthening using high-modulus CFRP plates for buckling control," J. Compos. Constr., vol. 1, no. 1, pp. 2-12, 2009.
https://doi.org/10.1061/(ASCE)1090-0268(2009)13:1(2) DOI: https://doi.org/10.1061/(ASCE)1090-0268(2009)13:1(2)
M. R. Bambach, "Strengthening of thin-walled (hollow) steel sections using fiber-reinforced polymer (FRP) composites," in Rehabilitation of Metallic Civil Infrastructure Using Fiber-Reinforced Polymer (FRP) Composites, V. M. Karbhari, Ed. Cambridge, UK: Woodhead, 2014, pp. 140-163.
https://doi.org/10.1533/9780857096654.2.140 DOI: https://doi.org/10.1533/9780857096654.2.140
A. H. Keykha, N. Nekooei, and R. Rahgozar, "Experimental and theoretical analysis of hollow steel columns strengthening by CFRP," Civil Eng. Dimens., vol. 17, no. 2, pp. 101-107, 2015.
https://doi.org/10.9744/ced.17.2.101-107 DOI: https://doi.org/10.9744/ced.17.2.101-107
American Society for Testing Materials (ASTM), Annual Book of ASTM Standards E8/E8M-22. PA, USA, 2022.
American Society for Testing Materials (ASTM), Annual Book of ASTM Standards A322-91. PA, USA, 2014.
Steel Construction Manual. American Institute of Steel Construction, 15th ed., USA, 2017.
C. G. Salmon, J. E. Johnson, and F. A. Malhas, Steel Structures Design and Behavior. 5th ed., USA: Pearson, 2009.
L. F. Geschwindner, Unified Design of Steel Structures. USA: John Wiley & Sons Inc., 2008.
G. L. Kulak and G. Y. Grondin, Limit States Design in Structural Steel. 7th ed., Canada: Canadian Institute of Steel Construction, 2002.
Product Data Sheet, Sika Wrap-300 C, Carbon Fiber Fabric for Structural Strengthening. Sika Construction Chemicals, Switzerland, 2020.
Product Data Sheet, Sika dur-330, Epoxy Laminating Resin for the Sika-Wrap Structural Strengthening System. 2018.
Z. Tao, L. Han, and J. Zhuang, "Axial loading behavior of CFRP strengthened concrete-filled steel tubular stub columns," Adv. Struct. Eng., vol. 10, no. 1, pp. 37-46, 2007.
https://doi.org/10.1260/136943307780150814 DOI: https://doi.org/10.1260/136943307780150814
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Ahmed Farhan Kadhim

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.







