Fatigue life of hybrid metal composite materials: A review
DOI:
https://doi.org/10.29194/NJES.29010057Keywords:
Hybrid Metal Composites, Fatigue Life, Mechanical PerformanceAbstract
Hybrid metal composite materials, combining diverse metal components, have emerged as promising alternatives in engineering applications, offering a unique synergy of mechanical properties. This review comprehensively examines the fatigue life of hybrid metal composites, delving into the intricate interplay of materials, manufacturing processes, and environmental factors. Drawing from a rich array of literature, the review explores the evolution of hybridization strategies, emphasizing their impact on fatigue resistance. Key factors influencing fatigue behavior, including material selection, manufacturing techniques, and environmental conditions, are systematically analyzed. The article highlights the significance of strategic hybridization in enhancing fatigue characteristics, reducing costs, and optimizing the overall performance of metal composites. The insights presented contribute to advancing the understanding of fatigue mechanisms in hybrid metal composite materials, offering valuable guidance for future research and engineering applications. Hybrid metal composite materials, characterized by the combination of diverse metal components, have garnered significant attention in engineering applications due to their potential to provide a unique synergy of mechanical properties. This comprehensive review delves into the intricate aspects of the fatigue life of hybrid metal composites, offering a thorough analysis of the interplay between materials, manufacturing processes, and environmental factors.
Downloads
References
C. E. Bakis et al., “Fiber-Reinforced Polymer Composites for Construction - State-of-the-Art Review,” Perspectives in Civil Engineering: Commemorating the 150th Anniversary of the American Society of Civil Engineers, vol. 6, no. May, pp. 369–383, 2003.
https://doi.org/10.1061/(asce)1090-0268(2002)6:2(73) DOI: https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(73)
T. P. Sathishkumar, J. Naveen, and S. Satheeshkumar, “Hybrid fiber reinforced polymer composites - A review,” Journal of Reinforced Plastics and Composites, vol. 33, no. 5, pp. 454–471, 2014.
https://doi.org/10.1177/0731684413516393 DOI: https://doi.org/10.1177/0731684413516393
S. Mortazavian and A. Fatemi, “Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites,” Compos B Eng, vol. 72, pp. 116–129, 2015.
https://doi.org/10.1016/j.compositesb.2014.11.041 DOI: https://doi.org/10.1016/j.compositesb.2014.11.041
G. D. Goh, Y. L. Yap, S. Agarwala, and W. Y. Yeong, “Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite,” Adv Mater Technol, vol. 4, no. 1, pp. 1–22, 2019.
https://doi.org/10.1002/admt.201800271 DOI: https://doi.org/10.1002/admt.201800271
C. ZWEBEN, “Tensile strength of hybrid composites,” 1977.
https://doi.org/10.2514/6.1977-416 DOI: https://doi.org/10.2514/6.1977-416
A. R. Bunsell and B. Harris, “Hybrid carbon and glass fibre composites,” Composites, vol. 5, no. 4, pp. 157–164, 1974.
https://doi.org/10.1016/0010-4361(74)90107-4 DOI: https://doi.org/10.1016/0010-4361(74)90107-4
G. Marom, S. Fischer, F. R. Tuler, and H. D. Wagner, “Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behaviour,” J Mater Sci, vol. 13, no. 7, pp. 1419–1426, 1978.
https://doi.org/10.1007/BF00553194 DOI: https://doi.org/10.1007/BF00553194
B. Harris and A. R. Bunsell, “Impact properties of glass fibre/carbon fibre hybrid composites,” Composites, vol. 6, no. 5, pp. 197–201, 1975.
https://doi.org/10.1016/0010-4361(75)90413-9 DOI: https://doi.org/10.1016/0010-4361(75)90413-9
F. Ribeiro, J. Sena-Cruz, and A. P. Vassilopoulos, “Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites,” Int J Fatigue, vol. 146, 2021.
https://doi.org/10.1016/j.ijfatigue.2021.106143
L. N. Phillips, “The hybrid effect - does it exist?,” Composites, vol. 7, no. 1, pp. 7–8, 1976.
https://doi.org/10.1016/0010-4361(76)90273-1 DOI: https://doi.org/10.1016/0010-4361(76)90273-1
S. B. Singh, H. Chawla, and B. Ranjitha, “Hybrid effect of functionally graded hybrid composites of glass–carbon fibers,” Mechanics of Advanced Materials and Structures, vol. 26, no. 14, pp. 1195–1208, 2019.
https://doi.org/10.1080/15376494.2018.1432792 DOI: https://doi.org/10.1080/15376494.2018.1432792
P. Zuo, D. V. Srinivasan, and A. P. Vassilopoulos, “Review of hybrid composites fatigue,” Compos Struct, vol. 274, no. May, p. 114358, 2021.
https://doi.org/10.1016/j.compstruct.2021.114358
H. Zhao, Z. Yang, and L. Guo, “Nacre-inspired composites with different macroscopic dimensions: Strategies for improved mechanical performance and applications,” NPG Asia Mater, vol. 10, no. 4, pp. 1–22, 2018.
https://doi.org/10.1038/s41427-018-0009-6 DOI: https://doi.org/10.1038/s41427-018-0009-6
A. K. Naskar, J. K. Keum, and R. G. Boeman, “Polymer matrix nanocomposites for automotive structural components,” Nat Nanotechnol, vol. 11, no. 12, pp. 1026–1030, 2016.
https://doi.org/10.1038/nnano.2016.262
J. Aveston and J. M. Sillwood, “Synergistic fibre strengthening in hybrid composites,” J Mater Sci, vol. 11, no. 10, pp. 1877–1883, 1976.
https://doi.org/10.1007/BF00708266 DOI: https://doi.org/10.1007/BF00708266
Y. Swolfs, L. Gorbatikh, and I. Verpoest, “Fibre hybridisation in polymer composites: A review,” Compos Part A Appl Sci Manuf, vol. 67, pp. 181–200, 2014.
https://doi.org/10.1016/j.compositesa.2014.08.027 DOI: https://doi.org/10.1016/j.compositesa.2014.08.027
J. D. Fuller and M. R. Wisnom, “Exploration of the potential for pseudo-ductility in thin ply CFRP angle-ply laminates via an analytical method,” Compos Sci Technol, vol. 112, pp. 8–15, 2015.
https://doi.org/10.1016/j.compscitech.2015.02.019 DOI: https://doi.org/10.1016/j.compscitech.2015.02.019
P. Zuo, D. V. Srinivasan, and A. P. Vassilopoulos, “Review of hybrid composites fatigue,” Oct. 15, 2021, Elsevier Ltd.
https://doi.org/10.1016/j.compstruct.2021.114358 DOI: https://doi.org/10.1016/j.compstruct.2021.114358
G. Czél, M. Jalalvand, M. R. Wisnom, and T. Czigány, “Design and characterisation of high performance, pseudo-ductile all-carbon/epoxy unidirectional hybrid composites,” Compos B Eng, vol. 111, pp. 348–356, 2017.
https://doi.org/10.1016/j.compositesb.2016.11.049 DOI: https://doi.org/10.1016/j.compositesb.2016.11.049
A. Prato, M. L. Longana, A. Hussain, and M. R. Wisnom, “Post-impact behaviour of pseudo-ductile thin-ply angle-ply hybrid composites,” Materials, vol. 12, no. 4, 2019.
https://doi.org/10.3390/ma12040579 DOI: https://doi.org/10.3390/ma12040579
A. P. Vassilopoulos, “The history of fiber-reinforced polymer composite laminate fatigue,” Int J Fatigue, vol. 134, no. January, p. 105512, 2020.
https://doi.org/10.1016/j.ijfatigue.2020.105512 DOI: https://doi.org/10.1016/j.ijfatigue.2020.105512
A. P. Vassilopoulos, “Fatigue life prediction of composites and composite structures,” 2019.
J. A. Collins, Failure of materials in mechanical design: analysis, prediction, prevention. John Wiley & Sons, 1993.
O. H. Basquin, “The Exponential Law of Endurance Tests,” Copyright of Key Engineering Materials is the property of Trans Tech Publications, Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder’s express written permission. However, users may pri, pp. 625–630, 1910.
K. Friedrich, Application of fracture mechanics to composite materials. Elsevier, 2012.
X. Zhao, X. Wang, Z. Wu, T. Keller, and A. P. Vassilopoulos, “Temperature effect on fatigue behavior of basalt fiber-reinforced polymer composites,” Polym Compos, vol. 40, no. 6, pp. 2273–2283, 2019.
https://doi.org/10.1002/pc.25035 DOI: https://doi.org/10.1002/pc.25035
Y. Swolfs, “Perspective for fibre-hybrid composites in wind energy applications,” Materials, vol. 10, no. 11, 2017.
https://doi.org/10.3390/ma10111281 DOI: https://doi.org/10.3390/ma10111281
G. Fernando, R. F. Dickson, T. Adam, H. Reiter, and B. Harris, “Fatigue behaviour of hybrid composites - Part 1 Carbon/Kevlar hybrids,” J Mater Sci, vol. 23, no. 10, pp. 3732–3743, 1988.
https://doi.org/10.1007/BF00540521 DOI: https://doi.org/10.1007/BF00540521
A. Shahzad, Investigation into fatigue strength of natural/synthetic fiber-based composite materials. Elsevier Ltd, 2018.
https://doi.org/10.1016/B978-0-08-102292-4.00012-6 DOI: https://doi.org/10.1016/B978-0-08-102292-4.00012-6
A. Vlot, “Impact loading on fibre metal laminates,” Int J Impact Eng, vol. 18, no. 3, pp. 291–307, 1996. https://doi.org/10.1016/0734-743X(96)89050-6 DOI: https://doi.org/10.1016/0734-743X(96)89050-6
M. Sadighi, R. C. Alderliesten, and R. Benedictus, “Impact resistance of fiber-metal laminates: A review,” Int J Impact Eng, vol. 49, pp. 77–90, 2012.
https://doi.org/10.1016/j.ijimpeng.2012.05.006 DOI: https://doi.org/10.1016/j.ijimpeng.2012.05.006
F. Ribeiro, J. Sena-Cruz, and A. P. Vassilopoulos, “Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites,” Int J Fatigue, vol. 146, May 2021.
https://doi.org/10.1016/j.ijfatigue.2021.106143 DOI: https://doi.org/10.1016/j.ijfatigue.2021.106143
PW. Bach, “Fatigue Properties of Glass- and Glass/Carbon-Polyester Composites for Wind Turbines,” no. 3977703, pp. 1–111, 1992.
T. Westphal, P. Bortolotti, and R. P. L. Nijssen, “Carbon glass hybrid materials for wind turbine rotor blades,” European Wind Energy Conference and Exhibition, EWEC 2013, vol. 3, pp. 2000–2007, 2013.
K. E. Hofer, M. Stander, and L. C. Bennett, “Degradation and enhancement of the fatigue behavior of glass/graphite/epoxy hybrid composites after accelerated aging,” Polym Eng Sci, vol. 18, no. 2, pp. 120–127, 1978.
https://doi.org/10.1002/pen.760180210 DOI: https://doi.org/10.1002/pen.760180210
N. Hashim, D. L. A. Majid, E. S. Mahdi, R. Zahari, and N. Yidris, “Effect of fiber loading directions on the low cycle fatigue of intraply carbon-Kevlar reinforced epoxy hybrid composites,” Compos Struct, vol. 212, no. December 2018, pp. 476–483, 2019.
https://doi.org/10.1016/j.compstruct.2019.01.036 DOI: https://doi.org/10.1016/j.compstruct.2019.01.036
G. Marom, H. Harel, S. Neumann, K. Friedrich, K. Schulte, and H. D. Wagner, “Fatigue behaviour and rate-dependent properties of aramid fibre /. carbon fibre hybrid composites G. Marom, H. Israel / Technical University Hamburg-Harburg, FRG /Institutefor Materials Science, DFVLR, FRG/ §Weizmann Institute of Science , Israe,” no. November, p. 1989, 1989. DOI: https://doi.org/10.1016/0010-4361(89)90883-5
H. Harel, J. Aronhime, K. Schulte, K. Friedrich, and G. Marom, “Rate-dependent fatigue of aramid-fibre/carbon-fibre hybrids,” J Mater Sci, vol. 25, no. 2, pp. 1313–1317, 1990.
https://doi.org/10.1007/BF00585442 DOI: https://doi.org/10.1007/BF00585442
A. A. J. M. Peijs and J. M. M. de Kok, “Hybrid composites based on polyethylene and carbon fibres. Part 6: Tensile and fatigue behaviour,” Composites, vol. 24, no. 1, pp. 19–32, 1993.
https://doi.org/10.1016/0010-4361(93)90260-F DOI: https://doi.org/10.1016/0010-4361(93)90260-F
G. Dai and L. Mishnaevsky, “Fatigue of hybrid glass/carbon composites: 3D computational studies,” Compos Sci Technol, vol. 94, pp. 71–79, 2014.
https://doi.org/10.1016/j.compscitech.2014.01.014 DOI: https://doi.org/10.1016/j.compscitech.2014.01.014
Y. Shan and K. Liao, “Environmental fatigue behavior and life prediction of unidirectional glass-carbon/epoxy hybrid composites,” Int J Fatigue, vol. 24, no. 8, pp. 847–859, 2002.
https://doi.org/10.1016/S0142-1123(01)00210-9 DOI: https://doi.org/10.1016/S0142-1123(01)00210-9
G. Belingardi, M. P. Cavatorta, and C. Frasca, “Bending fatigue behavior of glass-carbon/epoxy hybrid composites,” Compos Sci Technol, vol. 66, no. 2, pp. 222–232, 2006.
https://doi.org/10.1016/j.compscitech.2005.04.031 DOI: https://doi.org/10.1016/j.compscitech.2005.04.031
A. Shahzad, “Impact and fatigue properties of hemp-glass fiber hybrid biocomposites,” Journal of Reinforced Plastics and Composites, vol. 30, no. 16, pp. 1389–1398, 2011.
https://doi.org/10.1177/0731684411425975 DOI: https://doi.org/10.1177/0731684411425975
G. Belingardi and M. P. Cavatorta, “Bending fatigue stiffness and strength degradation in carbon-glass/epoxy hybrid laminates: Cross-ply vs. angle-ply specimens,” Int J Fatigue, vol. 28, no. 8, pp. 815–825, 2006.
https://doi.org/10.1016/j.ijfatigue.2005.11.009 DOI: https://doi.org/10.1016/j.ijfatigue.2005.11.009
M. P. Cavatorta, “A comparative study of the fatigue and post-fatigue behavior of carbon-glass/epoxy hybrid RTM and hand lay-up composites,” J Mater Sci, vol. 42, no. 20, pp. 8636–8644, 2007.
https://doi.org/10.1007/s10853-007-1847-8 DOI: https://doi.org/10.1007/s10853-007-1847-8
M. Habibi, L. Laperrière, and H. M. Hassanabadi, “Effect of moisture absorption and temperature on quasi-static and fatigue behavior of nonwoven flax epoxy composite,” Compos B Eng, vol. 166, pp. 31–40, 2019.
https://doi.org/10.1016/j.compositesb.2018.11.131 DOI: https://doi.org/10.1016/j.compositesb.2018.11.131
M. Costa, G. Viana, L. F. M. da Silva, and R. D. S. G. Campilho, “Environmental effect on the fatigue degradation of adhesive joints: A review,” Journal of Adhesion, vol. 93, no. 1–2, pp. 127–146, 2017.
https://doi.org/10.1080/00218464.2016.1179117 DOI: https://doi.org/10.1080/00218464.2016.1179117
Y. Shan, L. Kian-Fong, W. Kai-Tak, and K. Liao, “Static and Dynamic Fatigue of Glass – Carbon Hybrid Composites in,” vol. 36, no. 02, pp. 159–172, 2001. DOI: https://doi.org/10.1177/0021998302036002555
https://doi.org/10.1106/002199802023555
F. McBagonluri, K. Garcia, M. Hayes, and K. N. E. Verghese, “Characteristics of fatigue and combined environments on durability performance of glass/vinylester composites for infrastructure.,” Int J Fatigue, vol. 22, pp. 53–64, 2000. DOI: https://doi.org/10.1016/S0142-1123(99)00100-0
Y. Zhang, A. P. Vassilopoulos, and T. Keller, “Environmental effects on fatigue behavior of adhesively-bonded pultruded structural joints,” Compos Sci Technol, vol. 69, no. 7–8, pp. 1022–1028, 2009.
https://doi.org/10.1016/j.compscitech.2009.01.024 DOI: https://doi.org/10.1016/j.compscitech.2009.01.024
M. Savvilotidou, T. Keller, and A. P. Vassilopoulos, “Fatigue performance of a cold-curing structural epoxy adhesive subjected to moist environments,” Int J Fatigue, vol. 103, pp. 405–414, 2017.
https://doi.org/10.1016/j.ijfatigue.2017.06.022 DOI: https://doi.org/10.1016/j.ijfatigue.2017.06.022
W. Fan et al., “Fatigue behavior of the 3D orthogonal carbon/glass fibers hybrid composite under three-point bending load,” Mater Des, vol. 183, p. 108112, 2019.
https://doi.org/10.1016/j.matdes.2019.108112 DOI: https://doi.org/10.1016/j.matdes.2019.108112
R. B. Ladani, C. H. Wang, and A. P. Mouritz, “Delamination fatigue resistant three-dimensional textile self-healing composites,” Compos Part A Appl Sci Manuf, vol. 127, no. September, p. 105626, 2019.
https://doi.org/10.1016/j.compositesa.2019.105626 DOI: https://doi.org/10.1016/j.compositesa.2019.105626
T. Brugo et al., “Study on Mode I fatigue behaviour of Nylon 6,6 nanoreinforced CFRP laminates,” Compos Struct, vol. 164, pp. 51–57, 2017.
https://doi.org/10.1016/j.compstruct.2016.12.070 DOI: https://doi.org/10.1016/j.compstruct.2016.12.070
K. Shivakumar, S. Lingaiah, H. Chen, P. Akangah, G. Swaminathan, and L. Russell, “Polymer nanofabric interleaved composite laminates,” AIAA Journal, vol. 47, no. 7, pp. 1723–1729, 2009.
https://doi.org/10.2514/1.41791 DOI: https://doi.org/10.2514/1.41791
A. Alawar, E. J. Bosze, and S. R. Nutt, “A composite core conductor for low sag at high temperatures,” IEEE Transactions on Power Delivery, vol. 20, no. 3, pp. 2193–2199, 2005.
https://doi.org/10.1109/TPWRD.2005.848736 DOI: https://doi.org/10.1109/TPWRD.2005.848736
A. Fotouh, J. D. Wolodko, and M. G. Lipsett, “Fatigue of natural fiber thermoplastic composites,” Compos B Eng, vol. 62, pp. 175–182, 2014.
https://doi.org/10.1016/j.compositesb.2014.02.023 DOI: https://doi.org/10.1016/j.compositesb.2014.02.023
M. M. Thwe and K. Liao, “Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites,” Compos Sci Technol, vol. 63, no. 3–4, pp. 375–387, 2003.
https://doi.org/10.1016/S0266-3538(02)00225-7 DOI: https://doi.org/10.1016/S0266-3538(02)00225-7
M. C. Seghini et al., “Fatigue behaviour of flax-basalt/epoxy hybrid composites in comparison with non-hybrid composites,” Int J Fatigue, vol. 139, no. June, p. 105800, 2020.
https://doi.org/10.1016/j.ijfatigue.2020.105800 DOI: https://doi.org/10.1016/j.ijfatigue.2020.105800
A. Shahzad and D. H. Isaac, “Flame-Retardancy Properties of Intumescent Ammonium Poly(Phosphate) and Mineral Filler Magnesium Hydroxide in Combination with Graphene,” Polymers and Polymer Composites, vol. 16, no. 2, pp. 101–113, 2008.
N. H. Mostafa, “Tensile and fatigue properties of Jute-Glass hybrid fibre reinforced epoxy composites,” Mater Res Express, vol. 6, no. 8, 2019.
https://doi.org/10.1088/2053-1591/ab21f9 DOI: https://doi.org/10.1088/2053-1591/ab21f9
M. J. Sharba, Z. Leman, M. T. H. Sultan, M. R. Ishak, and M. A. Azmah Hanim, “Effects of kenaf fiber orientation on mechanical properties and fatigue life of glass/kenaf hybrid composites,” Bioresources, vol. 11, no. 1, pp. 1448–1465, 2016. DOI: https://doi.org/10.15376/biores.11.1.2665-2683
https://doi.org/10.15376/biores.11.1.1448-1465 DOI: https://doi.org/10.15376/biores.11.1.1448-1465
M. Kawai and A. Hachinohe, “Two-stress level fatigue of unidirectional fiber-metal hybrid composite: GLARE 2,” 2002. [Online]. Available: www.elsevier.com/locate/ijfatigue DOI: https://doi.org/10.1016/S0142-1123(01)00108-6
S. Sankarasabapathi, N. Subramaniam, S. Velmurugan, and G. R. E. Nelson, “Exploring the mechanical and microstructural characterization of stir cast aluminum 8011 matrix hybrid composites,” Matéria (Rio de Janeiro), vol. 30, 2025. https://doi.org/10.1590/1517-7076-rmat-2024-0904 DOI: https://doi.org/10.1590/1517-7076-rmat-2024-0904
A. Naskar, J. Keum, and R. Boeman, “Polymer matrix nanocomposites for automotive structural components,” Nat Nanotechnol, vol. 11, pp. 1026–1030, Jul. 2016.
https://doi.org/10.1038/nnano.2016.262 DOI: https://doi.org/10.1038/nnano.2016.262
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Yaseen Rashid, Basim M. Fadhil, Dlair O. Ramadan
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.
How to Cite
