Impact of synthetic fibers on the performance characteristics of asphalt concrete mixtures: a comprehensive review
DOI:
https://doi.org/10.29194/NJES.29010026Keywords:
Synthetic fibers, Fiber properties, Mechanical Performance, Hot Mix Asphalt, Rutting, Tensile StrengthAbstract
The properties related to Synthetic fibers such as significant strength, ductility, and durability lead the fibers to be adequate in enhancing the mechanical properties of asphalt concrete mixtures and that indicated by several studies. This paper aims to deliver an overview about the reinforcing influence of synthetic fibers on the mechanical and performance properties of asphalt concrete mixture.
This paper surveys the literature on synthetic fibers and their applications in enhancing the mechanical features of asphaltic mixtures. It could serve as a reference for prospective modification and development of asphalt pavement by synthetic fibres. The characteristics of prevalent synthetic fibers are introduced, and their usage in asphalt mixtures is evaluated. A review of fiber surface treatment techniques demonstrates that they can enhance the performance of synthetic fibers in asphalt concrete mixtures, especially on the chemical surface. The article debates how synthetic fibre inclusion influences asphalt concrete mechanical performance, including rutting resistance, tensile strength, water susceptibility, and cracking resistance. The review indicates that using fibers such as aramid, glass, polyester, polyamide, and carbon improves asphalt pavement resistance to permanent deformation.
Downloads
References
H. Zhu, J. Yang, L. Cong, J. Cui, and J. Wan, "Influence of polyester fiber on the performance of asphalt mixes," Southeast Univ., Nanjing, China, 210096.
S. Chen, X. Liu, H. Luo, et al., "A state-of-the-art review of asphalt pavement surface texture and its measurement techniques," J. Road Eng., vol. 2, no. 2, pp. 156-180, 2022.
https://doi.org/10.1016/j.jreng.2022.05.003 DOI: https://doi.org/10.1016/j.jreng.2022.05.003
H. Li, C. Cui, A. A. Temitope, et al., "Effect of SBS and crumb rubber on asphalt modification: a review of the properties and practical application," J. Traffic Transp. Eng. (Eng. Ed.), vol. 8, no. 5, pp. 836-863, 2022.
https://doi.org/10.1016/j.jtte.2022.03.002 DOI: https://doi.org/10.1016/j.jtte.2022.03.002
M. Motamedi, G. Shafabakhsh, and M. Azadi, "Evaluation of fatigue and rutting properties of asphalt binder and mastic modified by synthesized polyurethane," J. Traffic Transp. Eng. (Eng. Ed.), vol. 8, no. 6, pp. 1036-1048, 2021.
https://doi.org/10.1016/j.jtte.2020.05.006 DOI: https://doi.org/10.1016/j.jtte.2020.05.006
M. R. M. Aliha, A. Razmi, and A. Mansourian, "The influence of natural and synthetic fibers on low temperature mixed mode I+II fracture behavior of warm mix asphalt (WMA) materials," Eng. Fract. Mech., vol. 182, pp. 322-336, 2017.
https://doi.org/10.1016/j.engfracmech.2017.06.003
B. Shu, S. Wu, L. Dong, et al., "Self-healing capability of asphalt mixture containing polymeric composite fibers under acid and saline-alkali water solutions," J. Cleaner Prod., vol. 268, p. 122387, 2020.
https://doi.org/10.1016/j.jclepro.2020.122387 DOI: https://doi.org/10.1016/j.jclepro.2020.122387
D. Scorza, R. Luciano, S. Mousa, et al., "Fracture behaviour of hybrid fibre-reinforced roller-compacted concrete used in pavements," Constr. Build. Mater., vol. 271, p. 121554, 2021.
https://doi.org/10.1016/j.conbuildmat.2020.121554 DOI: https://doi.org/10.1016/j.conbuildmat.2020.121554
J. J. Stempihar, M. I. Souliman, and K. E. Kaloush, "Fiber-reinforced asphalt concrete as sustainable paving material for airfields," Transp. Res. Rec., vol. 2266, pp. 60-68, 2012.
https://doi.org/10.3141/2266-07 DOI: https://doi.org/10.3141/2266-07
H. Jia, Y. Sheng, H. Lyu, et al., "Effects of bamboo fiber on the mechanical properties of asphalt mixtures," Constr. Build. Mater., vol. 289, p. 123196, 2021.
https://doi.org/10.1016/j.conbuildmat.2021.123196 DOI: https://doi.org/10.1016/j.conbuildmat.2021.123196
C. Celauro and F. G. Pratico, "Asphalt mixtures modified with basalt fibres for surface courses," Constr. Build. Mater., vol. 170, pp. 245-253, 2018.
https://doi.org/10.1016/j.conbuildmat.2018.03.058 DOI: https://doi.org/10.1016/j.conbuildmat.2018.03.058
F. C. Antico, P. Rojas, F. Briones, et al., "Animal fibers as water reservoirs for internal curing of mortars and their limits caused by fiber clustering," Constr. Build. Mater., vol. 267, p. 120918, 2021.
https://doi.org/10.1016/j.conbuildmat.2020.120918 DOI: https://doi.org/10.1016/j.conbuildmat.2020.120918
O. S. Abiola, W. K. Kupolati, E. R. Sadiku, et al., "Utilisation of natural fibre as modifier in bituminous mixes: a review," Constr. Build. Mater., vol. 54, pp. 305-312, 2014.
https://doi.org/10.1016/j.conbuildmat.2013.12.037 DOI: https://doi.org/10.1016/j.conbuildmat.2013.12.037
H. K. Shanbara, F. Ruddock, and W. Atherton, "A laboratory study of high-performance cold mix asphalt mixtures reinforced with natural and synthetic fibres," Constr. Build. Mater., vol. 172, pp. 166-175, 2018.
https://doi.org/10.1016/j.conbuildmat.2018.03.252 DOI: https://doi.org/10.1016/j.conbuildmat.2018.03.252
A. H. Mrema, S.-H. Noh, O.-S. Kwon, et al., "Performance of glass wool fibers in asphalt concrete mixtures," Materials, vol. 13, no. 21, p. 13214699, 2020.
https://doi.org/10.3390/ma13214699 DOI: https://doi.org/10.3390/ma13214699
C. J. Slebi-Acevedo, P. Lastra-Gonzalez, D. Castro-Fresno, et al., "An experimental laboratory study of fiber-reinforced asphalt mortars with polyolefin-aramid and polyacrylonitrile fibers," Constr. Build. Mater., vol. 248, p. 118622, 2020.
https://doi.org/10.1016/j.conbuildmat.2020.118622 DOI: https://doi.org/10.1016/j.conbuildmat.2020.118622
J. O. Orwa, J. Reiner, A. Juma, et al., "Growth of diamond coating on carbon fiber: relationship between fiber microstructure and stability in hydrogen plasma," Diamond Relat. Mater., vol. 115, p. 1108349, 2021.
https://doi.org/10.1016/j.diamond.2021.108349 DOI: https://doi.org/10.1016/j.diamond.2021.108349
Y. Liu and S. Kumar, "Recent progress in fabrication, structure, and properties of carbon fibers," Polym. Rev., vol. 52, no. 3, pp. 234-258, 2012.
https://doi.org/10.1080/15583724.2012.705410 DOI: https://doi.org/10.1080/15583724.2012.705410
M.-J. Kim, S. Kim, D.-Y. Yoo, et al., "Enhancing mechanical properties of asphalt concrete using synthetic fibers," Constr. Build. Mater., vol. 178, pp. 233-243, 2018.
https://doi.org/10.1016/j.conbuildmat.2018.05.070 DOI: https://doi.org/10.1016/j.conbuildmat.2018.05.070
A. R. Bunsell, Handbook of Properties of Textile and Technical Fibres. Amsterdam, The Netherlands: Elsevier, 2018.
S. Wu, Q. Ye, and N. Li, "Investigation of rheological and fatigue properties of asphalt mixtures containing polyester fibers," Constr. Build. Mater., vol. 22, no. 10, pp. 2111-2115, 2008.
https://doi.org/10.1016/j.conbuildmat.2007.07.018 DOI: https://doi.org/10.1016/j.conbuildmat.2007.07.018
H. Noorvand, M. Mamlouk, and K. Kaloush, "Evaluation of optimum fiber length in fiber-reinforced asphalt concrete," J. Mater. Civ. Eng., vol. 34, no. 3, p. 04021494, 2022.
https://doi.org/10.1061/(ASCE)MT.1943-5533.0004128 DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0004128
C. J. Slebi-Acevedo, P. Lastra-Gonzalez, D. Castro-Fresno, et al., "Experimental evaluation and recyclability potential of asphalt concrete mixtures with polyacrylonitrile fibers," Constr. Build. Mater., vol. 317, p. 125829, 2022.
https://doi.org/10.1016/j.conbuildmat.2021.125829 DOI: https://doi.org/10.1016/j.conbuildmat.2021.125829
Y. Xiang, Y. Xie, and G. Long, "Effect of basalt fiber surface silane coupling agent coating on fiber-reinforced asphalt: from macro-mechanical performance to micro-interfacial mechanism," Constr. Build. Mater., vol. 179, pp. 107-116, 2018.
https://doi.org/10.1016/j.conbuildmat.2018.05.192 DOI: https://doi.org/10.1016/j.conbuildmat.2018.05.192
T. M. Phan, S. N. Nguyen, C.-B. Seo, et al., "Effect of treated fibers on performance of asphalt mixture," Constr. Build. Mater., vol. 274, p. 122051, 2021.
https://doi.org/10.1016/j.conbuildmat.2020.122051 DOI: https://doi.org/10.1016/j.conbuildmat.2020.122051
R. Yan, Y. Zhou, H. Huo, et al., "Damage evolution behavior of cold plasma treated glass fiber/vinyl ester resin composites under bending load by acoustic emission," Compos. Commun., vol. 30, p. 101075, 2022.
https://doi.org/10.1016/j.coco.2022.101075 DOI: https://doi.org/10.1016/j.coco.2022.101075
E. M. Fernandes, J. F. Mano, and R. L. Reis, "Hybrid cork-polymer composites containing sisal fibre: morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction," Compos. Struct., vol. 105, pp. 153-162, 2013.
https://doi.org/10.1016/j.compstruct.2013.05.012 DOI: https://doi.org/10.1016/j.compstruct.2013.05.012
X. Xing, T. Liu, J. Pei, et al., "Effect of fiber length and surface treatment on the performance of fiber-modified binder," Constr. Build. Mater., vol. 248, p. 118702, 2020.
https://doi.org/10.1016/j.conbuildmat.2020.118702 DOI: https://doi.org/10.1016/j.conbuildmat.2020.118702
A. H. Guha and G. J. Assaf, "Effect of portland cement as a filler in hot-mix asphalt in hot regions," J. Build. Eng., vol. 28, p. 101036, 2020.
https://doi.org/10.1016/j.jobe.2019.101036 DOI: https://doi.org/10.1016/j.jobe.2019.101036
B. Javilla, H. Fang, L. Mo, et al., "Test evaluation of rutting performance indicators of asphalt mixtures," Constr. Build. Mater., vol. 155, pp. 1215-1223, 2017.
https://doi.org/10.1016/j.conbuildmat.2017.07.164 DOI: https://doi.org/10.1016/j.conbuildmat.2017.07.164
J. Ren, B. Xue, L. Zhang, et al., "Characterization and prediction of rutting resistance of rock asphalt mixture under the coupling effect of water and high-temperature," Constr. Build. Mater., 2020.
https://doi.org/10.1016/j.conbuildmat.2020.119316 DOI: https://doi.org/10.1016/j.conbuildmat.2020.119316
H. Ziari, H. Divandari, M. Hajiloo, et al., "Investigating the effect of amorphous carbon powder on the moisture sensitivity, fatigue performance and rutting resistance of rubberized asphalt concrete mixtures," Constr. Build. Mater., vol. 217, pp. 62-72, 2019.
https://doi.org/10.1016/j.conbuildmat.2019.05.039 DOI: https://doi.org/10.1016/j.conbuildmat.2019.05.039
J. Tanzadeh and R. Shahrezagamasaei, "Laboratory assessment of hybrid fiber and nano-silica on reinforced porous asphalt mixtures," Constr. Build. Mater., vol. 144, pp. 260-270, 2017.
https://doi.org/10.1016/j.conbuildmat.2017.03.184 DOI: https://doi.org/10.1016/j.conbuildmat.2017.03.184
H. K. Shanbara, F. Ruddock, and W. Atherton, "A viscoplastic model for permanent deformation prediction of reinforced cold mix asphalt," Constr. Build. Mater., vol. 186, pp. 287-302, 2018.
https://doi.org/10.1016/j.conbuildmat.2018.07.127 DOI: https://doi.org/10.1016/j.conbuildmat.2018.07.127
Y. Sheng, H. Jia, H. Lyu, et al., "Study on mesoscopic mechanics of recycled asphalt mixture in the indirect tensile test," Math. Probl. Eng., vol. 2020, p. 6621275, 2020.
https://doi.org/10.1155/2020/6621275 DOI: https://doi.org/10.1155/2020/6621275
W. Song, Z. Deng, H. Wu, et al., "Extended finite element modeling of hot mix asphalt based on the semi-circular bending test," Constr. Build. Mater., vol. 340, p. 127462, 2022.
https://doi.org/10.1016/j.conbuildmat.2022.127462 DOI: https://doi.org/10.1016/j.conbuildmat.2022.127462
Q. Guo, L. Li, Y. Cheng, et al., "Laboratory evaluation on performance of diatomite and glass fiber compound modified asphalt mixture," Mater. Des., vol. 66, pt. A, pp. 51-59, 2015.
https://doi.org/10.1016/j.matdes.2014.10.033 DOI: https://doi.org/10.1016/j.matdes.2014.10.033
K. S. Park, T. Shoukat, P. J. Yoo, et al., "Strengthening of hybrid glass fiber reinforced recycled hot-mix asphalt mixtures," Constr. Build. Mater., vol. 258, p. 118947, 2020.
https://doi.org/10.1016/j.conbuildmat.2020.118947 DOI: https://doi.org/10.1016/j.conbuildmat.2020.118947
R. Hong, J. Wu, and H. Cai, "Low-temperature crack resistance of coal gangue powder and polyester fibre asphalt mixture," Constr. Build. Mater., vol. 238, p. 117678, 2020.
https://doi.org/10.1016/j.conbuildmat.2019.117678 DOI: https://doi.org/10.1016/j.conbuildmat.2019.117678
H. Ziari, M. R. M. Aliha, A. Moniri, et al., "Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber," Constr. Build. Mater., vol. 230, p. 117015, 2020.
https://doi.org/10.1016/j.conbuildmat.2019.117015 DOI: https://doi.org/10.1016/j.conbuildmat.2019.117015
M. R. M. Aliha, A. Razmi, and A. Mansourian, "The influence of natural and synthetic fibers on low temperature mixed mode I+II fracture behavior of warm mix asphalt (WMA) materials," Eng. Fract. Mech., vol. 182, pp. 322-336, 2017.
https://doi.org/10.1016/j.engfracmech.2017.06.003 DOI: https://doi.org/10.1016/j.engfracmech.2017.06.003
W. Wang, R. Luo, G. Yan, et al., "Evaluation on moisture sensitivity induced by dynamic pore water pressure for asphalt mixture and its components using the bending beam rheometer method," Constr. Build. Mater., vol. 251, p. 118942, 2020.
https://doi.org/10.1016/j.conbuildmat.2020.118942 DOI: https://doi.org/10.1016/j.conbuildmat.2020.118942
P. Cui, S. Wu, Y. Xiao, et al., "3D reconstruction of moisture damage resulted volumetric changes in porous asphalt mixture," Constr. Build. Mater., vol. 228, p. 116658, 2019.
https://doi.org/10.1016/j.conbuildmat.2019.08.039 DOI: https://doi.org/10.1016/j.conbuildmat.2019.08.039
H. Goli and M. Latifi, "Evaluation of the effect of moisture on behavior of warm mix asphalt (WMA) mixtures containing recycled asphalt pavement (RAP)," Constr. Build. Mater., vol. 247, p. 118526, 2020.
https://doi.org/10.1016/j.conbuildmat.2020.118526 DOI: https://doi.org/10.1016/j.conbuildmat.2020.118526
B. J. Putman and S. N. Amirkhanian, "Utilization of waste fibers in stone matrix asphalt mixtures," Resour. Conserv. Recycl., vol. 42, no. 3, pp. 265-274, 2004.
https://doi.org/10.1016/j.resconrec.2004.04.005 DOI: https://doi.org/10.1016/j.resconrec.2004.04.005
M. L. Afonso, M. Dinis-Almeida, and C. S. Fael, "Study of the porous asphalt performance with cellulosic fibres," Constr. Build. Mater., vol. 135, pp. 104-111, 2017.
https://doi.org/10.1016/j.conbuildmat.2016.12.222 DOI: https://doi.org/10.1016/j.conbuildmat.2016.12.222
B. Shirini and R. Imaninasab, "Performance evaluation of rubberized and SBS modified porous asphalt mixtures," Constr. Build. Mater., vol. 107, pp. 165-171, 2016.
https://doi.org/10.1016/j.conbuildmat.2016.01.006 DOI: https://doi.org/10.1016/j.conbuildmat.2016.01.006
A. Gupta, D. Castro-Fresno, P. Lastra-Gonzalez, et al., "Selection of fibers to improve porous asphalt mixtures using multi-criteria analysis," Constr. Build. Mater., vol. 266, pt. A, p. 121198, 2021.
https://doi.org/10.1016/j.conbuildmat.2020.121198 DOI: https://doi.org/10.1016/j.conbuildmat.2020.121198
H. A. Kassem, N. F. Saleh, A. A. Zalghout, et al., "Advanced characterization of asphalt concrete mixtures reinforced with synthetic fibers," J. Mater. Civ. Eng., vol. 30, no. 11, p. 04018307, 2018.
https://doi.org/10.1061/(ASCE)MT.1943-5533.0002521 DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002521
K. Anurag, F. Xiao, and S. N. Amirkhanian, "Laboratory investigation of indirect tensile strength using roofing polyester waste fibers in hot mix asphalt," Constr. Build. Mater., vol. 23, no. 5, pp. 2035-2040, 2009.
https://doi.org/10.1016/j.conbuildmat.2008.08.018 DOI: https://doi.org/10.1016/j.conbuildmat.2008.08.018
M. Fakhri and S. A. Hosseini, "Laboratory evaluation of rutting and moisture damage resistance of glass fiber modified warm mix asphalt incorporating high RAP proportion," Constr. Build. Mater., vol. 134, pp. 626-640, 2017.
https://doi.org/10.1016/j.conbuildmat.2016.12.168 DOI: https://doi.org/10.1016/j.conbuildmat.2016.12.168
F. Morea and R. Zerbino, "Improvement of asphalt mixture performance with glass macro-fibers," Constr. Build. Mater., vol. 164, pp. 113-120, 2018.
https://doi.org/10.1016/j.conbuildmat.2017.12.198 DOI: https://doi.org/10.1016/j.conbuildmat.2017.12.198
M. Aziminezhad, S. Mardi, P. Hajikarimi, et al., "Loading rate effect on fracture behavior of fiber reinforced high strength concrete using a semi-circular bending test," Constr. Build. Mater., vol. 240, p. 117681, 2020.
https://doi.org/10.1016/j.conbuildmat.2019.117681 DOI: https://doi.org/10.1016/j.conbuildmat.2019.117681
S. M. Mirabdolazimi and G. Shafabakhsh, "Rutting depth prediction of hot mix asphalts modified with forta fiber using artificial neural networks and genetic programming technique," Constr. Build. Mater., vol. 148, pp. 666-674, 2017.
https://doi.org/10.1016/j.conbuildmat.2017.05.088 DOI: https://doi.org/10.1016/j.conbuildmat.2017.05.088
S. Pirmohammad, Y. M. Shokorlou, and B. Amani, "Laboratory investigations on fracture toughness of asphalt concretes reinforced with carbon and kenaf fibers," Eng. Fract. Mech., vol. 226, p. 106875, 2020.
https://doi.org/10.1016/j.engfracmech.2020.106875 DOI: https://doi.org/10.1016/j.engfracmech.2020.106875
S. Qian, H. Ma, J. Feng, et al., "Fiber reinforcing effect on asphalt binder under low temperature," Constr. Build. Mater., vol. 61, pp. 120-124, 2014.
https://doi.org/10.1016/j.conbuildmat.2014.02.035 DOI: https://doi.org/10.1016/j.conbuildmat.2014.02.035
Q. Xu, H. Chen, and J. A. Prozzi, "Performance of fiber reinforced asphalt concrete under environmental temperature and water effects," Constr. Build. Mater., vol. 24, no. 10, pp. 2003-2010, 2010.
https://doi.org/10.1016/j.conbuildmat.2010.03.012 DOI: https://doi.org/10.1016/j.conbuildmat.2010.03.012
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Bareq Saleh Ali, Ahmed Farhan Al-Tameemi
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.
How to Cite
